Customize your guitar's tone effortlessly with our Pre-Wired Stratocaster pickguards. Crafted in the same factory as our legendary guitars using top - notch components, this pickguard is a breeze to install. Just take out your old pickguard, solder the output jack and ground wires, screw in the new one, and you'll be playing with authentic Fender sound right away. It features Vintage Noiseless Pickups with Polysol - coated magnet wire. The staggered hand - bevelled pole pieces deliver a smooth and balanced tone. Alnico 2 magnets bring complex harmonics, a warmer attack, and a less - aggressive midrange. Enjoy the vintage single - coil Strat tone without the annoying hum. The output wire is vinyl - coated, and it comes with a plastic bobbin. Specifications include Stratocaster® Pickguards type, Vintage Noiseless™ Single - Coil Strat® pickups for bridge, middle, and neck. It's shielded, has a 3 - Ply Parchment pickguard, aged white plastic control knobs, and an aged white switch tip.
Using this Fender pickguard is easy. First, carefully remove your old pickguard from your Stratocaster. Then, solder the output jack and ground wires according to the instructions. After that, screw in the new 3 - Ply Parchment pickguard. You're all set to play with a great Fender sound. When handling the pickguard, be gentle to avoid any scratches. Keep it away from sharp objects. For maintenance, you can use a soft, dry cloth to wipe it clean. Don't use any harsh chemicals as they might damage the finish. If you're not using the guitar for a long time, store the pickguard in a cool, dry place to prevent any warping or damage.
